Archives

Mazco manufactured valve changers work on valves with oblong port plug valves (Mueller, AY McDonald, Dresser, Rockford Eclipse, and other manufacturers) used on service risers and meter valves. These units are available in sizes from .300″ to 2″. All valve changers are Professional Engineer certified.

These valve changers work on valves for service risers, meter valves and other main line isolation devices. This technology allows for valve changes up to 100 PSI in a gas-free environment. Changing valves can be done in a few minutes and does not require eliminating flow from the source.

Manufactured valve changers are customizable to irregular port configuration and sizes and are customizable to virtually any length or diameter.

For more information on this device, contact your nearest distributor or Mazco directly.

Mazco manufactures tool adapters and tapered threaded plugs for stopping gas flow in service tee connections. They are available from 1/4″ and up, for threading into concentric holes drilled in the main or perforator type holes in the main.

Mazco manufacturers tooling to remove perforators on clamp-on or welded service tee connections and installing these tappping plugs as the initial closure to stop flow. Clamp-on devices can be completely removed from the main line without interupting main line flows.

Mazco also manufactures over-drilling tooling for torched or burnt holes in the main, to make them concetnric and allow the plug to be inserted.

Contact your nearest distributor or Mazco direct or more information.

Mazco is excited to introduce a new drill for the Safe-T-Stopper line of products. This drilling tool is used to drill holes on the backside of an elbow. Then a rubber plug is inserted, thereby stopping the gas to the branch outlet, so abandonment procedures performed without blowing gas.