Gas-Free removal and replacement of most 1/2″ – 2″ meter valves.
What is the Valve Changer?
Gas-Free removal and replacement of most 1/2″ – 2″ rectangular port or ball meter valves on steel and anodeless PE risers operating up to 100 psi.
Why Use It?
No blowing gas. Enhances public and worker safety. Fast and easy valve changeout. Customers can be back online in no time! Saves the cost of the entire service renewal.
Use on Many Outdated Valves
Many Valve Changers work in many situations, offering stoppers to fit undersized ports, stop units from 16 inches to 6 feet long. O-Ring style stoppers for extra small openings. Rectangular and cylindrical rubber stoppers.
Save Money
Remove only the leaking fitting. No excavation at the main or squeezing off the service line to shut it down.
Use on Standard Valves
Works on the valves you actually encounter. Other tools require specific minimum port dimensions and are limited to schedule 40/80 steel pipe. In the real world, that rules out a lot of jobs.
Build Your Own Kit
Build a kit specific to your needs.
Old & New Dresser Valves
Many legacy Dresser valves have a smaller port size.
Service Head Adapters
Decades of installing different service head adapters and anodeless risers make it difficult to use a standard tool. Specialty stoppers are required to get the job done.
Undersized Ports
Some old valves have extra tapered or undersized ports.
Easy Operation
1. Remove the piping and check valve passage using a sight glass.
2. Attach the Valve Changer and insert the stopper below the valve.
3. Remove old valve.
4. Install new valve.